Getting Started

Set up your account, add your first car, and get telemetry flowing.

1. Sign up

Speak with your TXR Motorsport reseller to activate a subscription. They'll get your account set up and send out your telemetry hardware.

2. Login as Team Admin and configure your car's CAN bus settings

Once your account is active, log in as Team Admin and add your car. You'll configure:

Which CAN signals to monitor and how to decode them (scale/offset per channel)
CAN bus bitrate (250, 500, or 1000 kbps)
The pit→car output CAN ID used for sending position, lap time, and driver messages

3. Connect the hardware

Connect the hardware in your car using the 4-pin Deutsch connector: 12V, Ground, CAN-Lo, and CAN-Hi.

The board self-provisions automatically the first time it powers on and connects — no manual configuration needed on the device itself once it's registered to your account.

4. Check the live dashboard

Once the board is powered and connected, telemetry should start appearing on your live dashboard within a few seconds. If nothing shows up, see the Support page.